easy, clean, and (when compared to "old fashioned" coverings) quick to use.
| FEATURES |
Super strong with a tensile strength of 25,000 psi (pounds/sq in)
Lightweight at only 0.2 oz/sq ft
Dry adhesive activates when heat is applied
Shrinks to a drum-tight finish as it cools
High gloss finish
Fuelproof and waterproof
Stronger and lighter than traditional silk and dope coverings
May be cleaned with glass cleaner, "409", or MonoKote Cleaner/Polish
| INCLUDES |
One roll (6' x 26") Black covering, instructions
REQUIRED: Sealing Iron Heat Gun
Iron Sock
| COMMENTS |
This is applied at Low-Temperature onto foam, fiberglass, and most plastics!
For covering balsa at High-Temperature suggest (TOPQ0200 TOPQ0706).
(EconoKote can be used on top of, but not under MonoKote.)
If using 3 or more rolls of the same color, suggest a 25' roll) to ensure
the same dye lot for the entire plane.
Temperature range:
Attaching to foam (activating the glue): 205°F (105°C)
